This time last week the weather was bright and sunny with temperatures around the 20degC mark, To-day it is blowing a blizzard outside, putting the damper on any chance of wood butchering the baseboard for Penmaenpool MPD, the next module in my Modular Cambrian model railway layout.
As it happens there is always other work that can be done indoors in the warm!
I need two points, (turnouts) for Penmaenpool and one Trap (catch) point.
I also wanted the minimum radius to be no less than 36inches, use bullhead rail and look a bit more prototypical than the Peco offerings.
I have down loaded the excellent Templot software and after playing about for an hour or two managed to print some full size templates of a B6 left hand turnout.
I have built PCB sleeper track before but, that was donkeys years ago when I was a member of Stourbridge Model railway Society. However I set to and built this B6 left hand turnout.
(Click picture for larger image)
The tie bar that operates the switch blades was designed to be similar to a RTP point so that I can operate it from below the baseboard using Tortoise point motors.
Electrically the switch blades are bonded to the appropriate running rails and are gapped just before the crossing.
The finished job being exactly like the DCC friendly modified Peco points.
So, there we have the result of an afternoon on the work bench, Just one more the same as this one and a trap point to make.
Better I shut up and get on with it then!
Cheers!
Frank
Wednesday, 4 April 2012
Monday, 2 April 2012
Modular Model Railway Layout (MMRL)
Now that Morfa Bach is almost completed a start has been made on module 2 Penmaenpool MPD, based on the actual prototype that existed on the Cambrian coast line between Dolgelleau and Morfa Mawddach.
Each module will be a "mini" layout or diorama in it's own right. At exhibitions the exhibition manager will have the choice of which "modules" he wants at his show. The caveat is that the "basic layout" of Morfa Bach and Penmaenpool MPD must be included, modules 3&4 (yet to be decided) are to be optional add ons.
Here's a block diagram showing the options that I hope will be available.
Each module will be a "mini" layout or diorama in it's own right. At exhibitions the exhibition manager will have the choice of which "modules" he wants at his show. The caveat is that the "basic layout" of Morfa Bach and Penmaenpool MPD must be included, modules 3&4 (yet to be decided) are to be optional add ons.
Here's a block diagram showing the options that I hope will be available.
Each layout board will be 4ft long and 1ft wide. The two fiddle yard are slightly wider to accommodate the turntable type storage roads.
More as it develops.
Cheers
Frank
Subscribe to:
Posts (Atom)
