Tuesday, 8 January 2013

A Hybrid Siphon



All in a days work!
Fresh off the kitchen table today is this Ex GWR Siphon 'G'


This model is a bit of a mongrel or to use a "posh" term a bit of a "Hybrid"
The body is Lima, picked up just before Christmas from one of our local exhibition traders who brings his stock to CHMRC every few months.
Anyway at a fiver for the complete item and boxed it was a bit of a bargain.
The chassis was removed and put into my "it'll come in handy one day" box under the shed work bench!
The chassis in the picture is in fact an Airfix/Hornby unit from a Siphon 'H' but much modified!
It has etched brass battery boxes, cast w/m dynamo and regulator box, cast w/m vacuum cylinders with wire brake rodding and other detail bits. Etched brass brake lever (Not the usual type found on these vehicles mind) Cast w/m buffers of the correct pattern, home made vacuum and steam heat pipes and screw couplings.


Bogies are the original Airfix/Hornby items with metal wheels and pinpoint axle bearings fitted.
The body has had nothing done to it apart from painting the ends black!
The weathering was done this afternoon using matt black enamel and some Carrs weathering powders.
Over all I am quite pleased with the result and might get around to detailing the body one day!It will make a nice addition to the fleet for "Steam on the Cambrian!

Another afternoons work to be posted soon!
Cheers
Frank

Saturday, 5 January 2013

Happy new year

Happy New Year!

I have taken advantage of the mild weather to work on the layout in my shed, Loco and rolling stock kit production being put on the back burner until the bad weather returns and I am confined to indoor working.

One thing I mentioned in my last post was the working down advanced starter.Most people now tend to use servos for this type of thing and so will I in future, but as I had solenoids that needed using up this particular signal is solenoid operated.

Now, the trouble with solenoid operation is that the action is too fierce and totally unrealistic. I have added a simple RC network to the solenoid operating circuit and this is the result ( Click Video link below)
http://www.flickr.com/photos/dukedog_9017/8348679819/

OK, so it's not 100% prototypical but, It is I think much better than the Slam-Slam operation of a solenoid with no slugging.

Another bit of progress on the shed itself.
I have fixed down some of the interior detail and in this shot you can just make out the fitters bench and vice in the Stygian gloom of the shed. I have fitted interior lighting but it's not wired just yet.

(Click for bigger pictures)



Other work done since new year is the ballasting is finished! Just needs track weathering now.
Loads of ash and cinders have been stuck down in front of the shed area, I still reckon I need more though!
Please excuse the camera shake (again) Lighting in my shed is not too good!




I would be interested in your comments 
More on Penmaenpool MPD soon!

Cheers

Frank